Saturday, September 10, 2016

Feeling Bullish About Bookbinding

Why not make bookcloth on Saturday?

Why not make my own bookcloth? I asked myself this last weekend and realized there was no good reason not to. A pinch of Googling told me the basics- you get some tissue paper, you use some normal fabric, and you have a piece of glass to glue onto to provide a flat/smooth surface. Boom. That's it. Why had I not thought to try sooner?

Backing up a bit, let me just say I've been on a book arts kick. There was a series of books I bound a while ago, and then a couple classes I took at the San Francisco Center for the Book. And then I did a collaborative project with local Kelly and Sarah on the East Coast. We took Suko transcripts from yet another game and turn them into a book for her (vaguely coinciding with her birthday). Alas, my photos of the amazing leatherwork provided by Sarah were so horrible I can't bring myself to post them. Will get better shots from Suko and post them later. Extremely beautiful final product, primarily due to Sarah's elaborate leather cover.

That weekend I decided I'd get around to binding my copy of the book. I'm quite fond of the quote from Contact: "Why build one when you can have two at twice the price?" I'd sent Sarah two copies of the book and she returned the unused one when she shipped back the final product. For this binding I opted for a safe, normal binding. Nothing fancy, nothing flashy. Just a solid case for my copy of the book.

A modest binding

Adding to my library

It turned out reasonably well, given that the spine was quite poorly done. I'm definitely learning. Still learning. Much learning to do. Which means much more binding required. Practice makes perfect. So in addition to binding the Academie book I bound a basic blank notebook. I used exceptionally thick card stock in order to get a reasonable spine width without too many pages. The actual book contents were bound a couple weeks ago. A couple weeks ago I also went to the Center for the Book and cleaned up the Academie book, trimmed the blank pages, and cut the covers.

It was only this last weekend that I decided to tie everything together. Since my blank pages were shiny, I decided I needed some shiny cover to go with it. I found this random piece of shiny/magical looking paper at the bottom of a drawer (from my letter writing itch) and realized neither the grey nor the red book cloth I had on hand would compliment it. Rather than give up or settle, I realized my fantastic collection of fabrics (from my quilting itch) could save me. And they did. I whipped up just the right amount of perfect book cloth and bound the book.

Mermaid book

Of course I had just the perfect blue ribbon laying around (from my now constant visits to the local candy store). My hoarding habit pays off! Anyway, it came together nicely. I've had more than one person remark that it's like a mermaid book. My only sadness is that the spine/book cloth got a smudge on it the day I brought it into work to show folks. It lacks that pristine new look now and so I sadly don't think I can sell it on Etsy... not sure what to do with it... but am happy I made it!

Everything shines Odd highlights

Funny how if the light hits it right it looks quite green.... other times it looks a lovely blue.

Spent this Saturday binding yet another book. Will post photos of it later. So happy with this latest bout of crafting. Off to go try and write more prose now for yet another mini book idea... Am definitely looking for more things and reasons to bind something. So if you've got any material you'd like turned into a book, let me know!

Sunday, August 7, 2016

All this writing

Life has gone on. The burning wreck that was April bleeding into May has receded into the distance and with the turn taken in June, moving to a lovely new home, I can't even see it in the rear view mirror of life any more. Out of sight, out of mind. So with all of that out of mind I've new things and thoughts rushing in to fill the vacated space.

Old self portrait & new project pieces

Thoughts, thoughts, thoughts. A pile of pennies, each individually rather worthless but collected and marveled at none the less by myself like a child with a tiny allowance. Am unsure what to do with them. What does one do with non-actionable ideas and pondered upon questions? I write them down frantically and it makes me happy. My red notebook brings me joy when I simply lay my finger tips upon it. I feel like I'd like to clean up and share my rambling musings in some form but am unsure how to best do so or if it's even a good idea.

Cisco era sketches

But the important thing is that I've already recorded them for myself and in the end that is the only audience I can truly hope or expect to please or perform for. For some reason I thought these ramblings were a new phase, an exciting swell of new ways of thinking... But that's only because my memory is poor and my periods of actual Rebeccian archeology infrequent.

Cisco era notes

The move required me to fully uproot and transplant myself somewhere else, somewhere smaller and so I was forced to dig up and turn over the top layer of sediment and creation cruft. The churn kicked up many (all?) old sketchbooks and loose leaf doodles and assorted desperately collected gaming detritus. I had the thought today to perhaps prune some of the notebooks- plucking out the "good" sketches and discarding the rest- assuming many blank pages between them. Instead I got a kick to the heart and a rush of memories.

Cisco era notes

I flipped through two spirals from my time at Cisco, the pages covered in incomprehensible notes about FPGAs and clock signals and truly wandering sketches. I looked into my own youthful gaze, captured in scribbled pen during an evening ride home. The damn things are like paper pensieves.

Very old TODO list

Another smaller spiral had skinny lists of TODOs and interview notes from yet another job transition. Perhaps I could have done away with that one but it was so small and such a quaint little snapshot of crafting efforts that I tucked it back on the shelf. The next was filled with scribbled text- first pages of prose I have no real recollection of writing (but written with the correct tempo and chalked full enough of alliteration that I could identify it as my own). Then were angry rants and silly musings that felt like a grip about my throat. Those feelings forgotten suddenly back and filling me with indignation or rage or that (now less frequent) strong feeling of distance and alienation.

I have no memory of this Angry rant I remember

Finally (flipping backwards as I do and often write) I hit the block of notes for and drafts of letters sent to friends. Dear This. Dear That. Names I still know and message. Names I miss. Names I no longer reflect upon. I didn't read them (I hate dwelling on my written letters once sent- one of the primary reasons I prefer physical to electronic mail) but my eyes couldn't help picking out phrases here and there. Reading backwards I tried to guess (some times with a sense of dread) what name would be at the start. I put that book back on the shelf and declared myself too emotionally exhausted to dare peek into another.

Cisco era sketches

Later. Surely later. I enjoy writing things out by hand in order to think. Surely knowing that they will sit there patiently to return to, legible to me no matter how scribbled, is part of the reason I do so. I think so. I think. I think I need to think a bit more about it later... now onto chicken bones.

Always be writing

Sunday, March 6, 2016

Small magnetic single throw double pole circuit

Back when I was a wee lass I saw Jurassic Park and knew then I wanted to get into computers so that I could create special effects. When I was a bit older we were visiting San Francisco and I went on an Aliens themed "3D" ride around Fisherman's Wharf (or maybe it was in Seattle?) Anyway, I remember being blown away by the experience of the seats moving and air hissing and decided I wanted to do computer stuff that would effect the real world. Fast forward a couple more years and I was at UW, majoring in Computer Engineering with a focus on embedded systems. Fast forward a few more after that and I'm a web dev tinkering with JavaScript... whoops. Might have miss-stepped somewhere along the way... but my love of computers is sound.

I have an inkling of knowledge on how to do things In The Real World but it's pretty weak. Turns out EE is hard and intimidating. But my interest remains strong. This, combined with my experiences doing several Escape Room games and the delight I had playing in a friend's Harry Potter puzzle LARP has lead me to the obvious conclusion that I should organize my own escape game.

Settling in to craft

Happily we got a lot of rain this weekend here in San Francisco. Not only does it help the drought problem, it allowed me to stay inside most of the weekend coding and crafting. And boy howdy is there a lot of coding and crafting to be done for this project.

A majority of the project is computer systems/pure code which I've been chipping away at, but some elements are hardware related and I've certainly been avoiding working on them. I enjoy it! But... it's hard. Thankfully I made actual progress on one portion but also wound up scrapping a different portion after repeated failure. Lets focus on the positive though!

If there's a chance you'll be playing in the game (you know who you might be, my so few Readers), I'd recommend not reading the rest of this post.

Not even half of what I needed Failed ideas

The goal: Have a surface that players can place an object on. The object has several magnets embedded in it, which activate switches below the surface when aligned correctly. The switches are attached to an Arduino which informs the computer, which informs the game server, which then has an effect on the game.

Turns out the end portion of it- the Arduino talking to the server is suuuuuper easy given the pySerial library. So the question here is about the circuit. Magnetic switches in a small space. Not difficult, right?

First attempt: run a wire to a bent paperclip, tape the wire to the hidden "floor" below, and use the wire as a hinge. Have the "surface" above be wrapped in tin foil and ground that. Now the wire runs to an Arduino pin in `INPUT_PULLUP` mode. Boom! Done! Success! When the magnet moves above the paperclip, the paperclip jumps up and grounds itself against the "surface" above and you've got a closed circuit!

Problem: There's only a couple pins on the Arduino and I'd like there be be a number of sensors so that different configurations can be recorded. That means each sensor circuit needs to ground 2 pins so I can have more unique combinations (That's multiplexing... right? Maybe?)

Next attempt: ... somehow close 2 circuits with a single paperclip's movement rather than just 1 circuit.

Problem(s): The paperclips I bent all had a single point of contact where the magnet was. The wire hinge was a bit too ridged/constricting to allow smaller pieces to rise and fall. I tried many different shapes and sizes and padding/fringe along the top of the paperclip that contacted the surface above. The signal was finicky, rarely closing both circuits.

Not really "success," but acceptable

eventually... "success!" (the signal is still a bit finicky, but good enough to go forward for now)

The solution? Have lots and lots of craft items laying around your house... No, really. The solution? conductive thread & copper tape

Conductive Thread : something needs to hold the paperclip to the "floor", allow it to pivot, and make sure it's connected to the circuit. Wire hinges were proving to be too ridged along with folded tape or aluminum foil. Enter the ever magical conductive thread. Taking two strands and tying them to the paper clip solved this problem. The clip was bent to be flat along the bottom, one strand tied to each corner, then the strands taped down with masking tape. It was a smooth hinge and a reliable connection. I wrapped the floor with aluminum foil and grounded it so that each paper clip is grounded via it's conductive thread tie downs.

Copper Tape : originally acquired for stained glass purposes, it's great. One side sticky, one side copper & conductive. Note that the sticky side is not conductive (sadly). I used this to mark out the traces on the bottom of the surface, where the paperclip would connect to. The tape is already pretty thin but I was able to cut it in half and place very close to each other- like laying out a sticker circuit board. I cut the paperclip to be U shaped, anchoring it to the floor at the bottom of the U. Now when the clip jumps up towards the magnet and closes the circuit, it has 2 little points contacting the 2 different traces (rather than one broad one).

Wednesday, January 27, 2016

Gaming Craft

I like gaming. The social aspect is fun, yes, and story telling, but it's this whole crafting/art project portion that really hooks me.

As I've aged I'm finding it a little harder to just make things willy nilly without thought as to why or for what purpose. I've tucked about as many little monsters about the house as Adam will let me. I've given ones to many friends and all family members. Why make more things? Well, making things is FUN! But... why? That's where gaming comes in. Now I'm making not just "something" but rather a prop or an accessory. A visual aid for something that involves more people than just me. Purpose.

D & D : Prep is fun

Up until this point I've mostly been playing in games but 2016 is the year I dip my toe in trying to run them. Picked up the D&D 5e suite of books/rules and have run 2 little one-shot games for my friends. Wouldn't say they've been that successful but I've definitely enjoyed having friends over and having an excuse to think creatively. The first game involved a 2 level map where I drew the ground on graph paper and then had a tree branch level drawn with dry erase markers on a glass shelf (resting on several cardboard tube tree trunks). The second involved a dungeon map slowly revealed as people explored it.

D & D : ready for that dungeon crawl

Turns out peeling off square by painful square of "fog of war" isn't super fun. Also, candy colored "fog of war" really doesn't add to the "dungeon crawl" vibe... The problem wasn't the taping down (that actually worked super well) but just the general scrabbling for a hold on tiny paper piece in order to pick up. One takeaway from it though was that drawing the map was a good exercise in thinking about the story and helping me build out an idea. Drawing is my best way of building a narrative- something I've known for a while.

Rogue Trader : Homework

Another delightful gaming craft recently worked on was the Rogue Trader Yu'Vath Battlestation Assault Plan. Given a rather math-y description of a patrolling ships around a point of interest, friend Nate and I wrote a little simulator to help find the best approach. Mind you, this is for a game I'm not even in. Was thrilled to have a valid reason to use the three.js library again and limber up my mind, wrapping it around 3D math/space/modeling. Not sure how long Nate will host it for, but the simulation is up at this site right now. [code posted on Github]

Monsterhearts : The PCs
While not really a craft, I've found games (mine but especially others') to be an excellent source of sketching and art. Friend Kelly drew the characters from a game and then flattered me by asking to help with inking/coloring it. I appreciate that with her effort/interest/involvement I managed to overcome the wall of white space most my sketches hang in and provide the vaguest of something for background (drawing backgrounds being my majorly failed 2015 New Years resolution). Never mind the fact that it's mostly a munged photo I found on the Internet...

I was going to follow this up with several more gaming sketches but alas this week's plot didn't get far enough...

Named arrows fly better

Along the gaming craft tangent: applying game content to other activities. Friend Suko and I continue our once-a-month shooting. I've marked my arrows with names of 4th Terminus characters and not only does it help me improve my aim/track my shot history but it also tells a story with every round. "Oh Hayley, once again going off target. Morgan, always flies true. Jayce, right where I send him and look at that- the Jaya arrow is snug up against him. Again." What I need to do now is figure out a better way to label the arrows. Right now I've scribbled the names on the nocks (over half of which need to be re-aligned) but the ink rubs off so easily there.... Anyway, the important take away is that once I named my arrows and could track which offset/corrections were needed for each I was able to hit the bullseye three times with the arrow named Jaya. Just saying. The other arrows need to start pulling their weight.

In conclusion gaming is fun. Friends are great, telling stories with them is a fantastic way to pass the time, and using said content to overlay on other actives makes everything better.

Sunday, January 3, 2016

Drawing 2016

Started the new year off right with an intense bout of sketching. On Friday I spent ~8 hours in front of the Cintiq and Saturday I followed up with a couple more.

Pride & Prejudice & Zombies

Drawing that much in one continuos flow felt great. The pictures themselves I don't know, but the feeling was fantastic. If I could draw like that more often I'm pretty sure I'd actually get better. Last night I had a vivid dream that I was still sketching, woke up partially and continued to feel it. "Gotta' make sure I save..." I remember thinking. This amuses me because it's the same sort of sleep processing feeling I get when I'm coming up to speed on a new programming language.

The main resolution last year that I completely bombed was "learn to draw landscapes" and it's definitely one I still want to try to tackle this year. And by landscapes I mostly just mean backgrounds, even the faintest of hints, for my sketches....

Corvo- so weak!

Using Clip Studio Paint as my primary sketching app & then doing colors/fill in Photoshop is working out quite well. I'm in love with the smoothing CSP does to the lines and I love the sensitivity options on the Pen & Pencil tools. I'm often jumping to the Marquee tool to reposition/resize my sketching as I go and often toggle back to the Pen tool by accident for a couple of strokes when I actually wanted the Pencil tool (both toggle on the P key). This has given an interesting sort of pacing/cadence to the the line sketching. Light feathery lines (Pencil), correction (Marquee), a few bold strokes (Pen), repeat.

Still feeling quite restrained in what I'm drawing though. Only used a pinch of photo references for the non-human elements but all subjects/scenes were from gaming sessions. Descriptions I heard or read. None of the crazy emo feeling sketches that spill out from my pen when I reach down inside and try to personify what the fuck is going on in there. Maybe next time.